The use of orthopaedic traction frame
2023-09-15
The correct use of orthopedic traction frame is as follows:
The patient was supine on an orthopaedic traction table. After anesthesia, 1/3 of the operating bed was removed, sacral seat cushion, perineal support base column, knee support bracket and traction boots were installed, the length of traction bar was initially determined according to the height of the patient, and each joint of the traction device was fixed. The patient was moved to the prepared traction bed, the hips were aligned with the lower edge of the bed, the lower limbs were suspended on the foot traction frame, the knee joints were placed flat on the support bracket and fixed, the feet were placed in the traction boots and the shoelaces were fastened. The abduction of the healthy upper limb should be placed on the handrest, and the affected upper limb should be properly restrained and suspended on the chest arm support. The Angle and strength of traction were appropriately adjusted according to the fracture type of the patient, and the reduction was achieved under the fluoroscopy of the C-arm machine, and good reduction effect was maintained through continuous traction.
Related News
2023-09-15
The general public will not understand the important role of the medical crane in the hospital
2023-09-15
Multifunctional electric beds need to be used correctly
2023-09-15
The use of orthopaedic traction frame
2023-09-15
A simple electric medical bed is also made up of tiny structures
2023-09-15
Electric operating table tilt fault solution
2023-09-15
Novice white must be clear about the two classifications of the operating bed
CONTACT US
E-mail: ab3@anbo88.com
E-mail: zoy.q@anbo88.com
E-mail: x.tong@anbo88.com
Address:Yuyuan Industrial Function Zone, Wuyi County,
Jinhua City,Zhejiang Province, China
Leaving a message.